Skip to main content

Dryer Duct Replacement in Chattanooga

When a Duct Is Crushed, Torn or Pulled Apart, We Take It Out and Put In Rigid Metal Pipe. You Get Photos of the New Pipe.

Some dryer ducts are past cleaning: crushed, torn or pulled apart. When yours is, we take it out and put in rigid metal pipe, taped per code. You get photos of the new pipe, because it goes right back where you can't see it.

50+ five-star reviews

Monday to Saturday, 7am to 6pm. Chattanooga and nearby North Georgia.

Gloved hands joining rigid galvanized pipe beside a crushed old flex duct during dryer duct replacement in Chattanooga.

What dryer duct replacement is

Your dryer pushes hot, damp, linty air through a duct that runs from behind the dryer to the outside of your house. You have probably never seen most of it. It lives in the wall, the attic or the crawl space.

When that duct is damaged past the point of a repair, dryer duct replacement in Chattanooga means one thing with us: the old duct comes out and rigid 28 gauge galvanized duct pipe goes in, taped per code and vented properly from start to finish.

A free inspection comes first. We find the issue and measure the project before anything gets replaced.

The last thing you get is photos of the project, because the work is going right back where you can't see it.

Fully insured.

50+ five-star reviews.

This page is about the long duct, the one that runs through the house.

Can't tell which one it is? The free inspection settles it.

Signs you need dryer duct replacement

Lint only leaves your house if the duct lets it. A duct that is crushed, torn or pulled apart stops doing that job, and no amount of brushing brings it back.

From the laundry room, you can notice this much:

You had the vent cleaned and the towels still need a second cycle.

Loads keep taking longer than they used to.

Someone already told you the duct is damaged.

What we find when we look

  • Crushed duct. The air has nowhere to go.
  • Disconnected duct. The pipe has come apart somewhere along the run.
  • Damaged duct, with holes or tears in it.
  • The wrong material. Flex duct strung through a crawl space or attic is asking for trouble.
  • Venting that was put in wrong to begin with.

The first list you can check yourself. The second you can't, so somebody tells you the pipe in your wall is shot, and you are supposed to nod and pay for a new one.

A pipe you can't see should come with proof.

So ours does. We explain what we found before we do anything, and we photograph the project.

What happens if a failed duct stays in

A duct that can't move air is a blocked vent, whatever is blocking it.

  • Drying takes longer and uses more energy. Maytag says that is what a blocked vent does.
  • The dryer runs hotter. Consumer Product Safety Commission tests found dryers run hotter when the vent is blocked.
  • On a gas dryer, a restricted vent may leak exhaust that could contain carbon monoxide, according to Technical Safety BC.
  • You keep paying for cleanings on a duct that cleaning cannot fix.

One call starts the free inspection. You hear what we found and what it costs before anything gets replaced.

The Safe & Dry Process, for a duct replacement

Find it. Fix it. Show it.

  1. FIND IT.

    The inspection is free. We find out what is wrong with the duct and whether it needs replacing at all. If it does, we measure the project. Then you hear what we found, what your options are, and what it costs, before we start.

  2. FIX IT.

    The failed duct comes out. Rigid 28 gauge galvanized duct pipe goes in. Every replacement, same pipe, so no flex duct goes back in your wall. It gets taped per code and vented properly from start to finish.

  3. SHOW IT.

    Photo documentation of the project is included. The new pipe is headed back into the wall, the attic or the crawl space, so you get to see it first.

    We test the airflow before we pack up, and you watch.

Three steps, in that order, on every job. See how it works on The Safe & Dry Process.

The first step costs you a phone call. The inspection is free.

What a duct replacement includes

  • A free inspection. We determine the issue and measure the project.
  • The price before the work. A replacement is priced on the length of the run and the materials it needs. You hear the number before we start. The estimate is free.
  • Rigid 28 gauge galvanized duct pipe. All of our duct replacement is done with it. No flex duct in your wall.
  • Taped per code. With no shortcuts where you can't see.
  • Vented properly, from start to finish. From behind the dryer to the outside of the house.
  • Photo documentation of the project. Included. They are your photos to keep. We show them to you before we leave.
Hand holding a phone to photograph new rigid galvanized pipe after a dryer duct replacement in a crawl space.

What it looks like when it's done

A metal duct with a clear path outside, so the air has somewhere to go. Loads typically dry in less time, though we won't promise a number, because every house is different.

And photos of a pipe you would otherwise never see. You know what is in your wall, because you looked.

After that, the pipe goes back behind the wall, and you keep the pictures.

Five stars

Matt was very professional and very helpful. My dryer wouldn't completely dry my clothes and would constantly shut off and give errors. I called Matt, The Lint Guy, and he was able to come out same week and get everything running properly. My dryer vent hose was very clogged and it wasn't hung correctly under my house. Matt was able to replace the vent hose and get it hung properly. He also cleaned my dryer. Very reasonable prices. I would recommend his services to everyone. Thanks again Matt!!

Renee Whitefield, Google review

Questions about replacing a dryer duct

Does my duct really need replacing, or can it be repaired?

It depends on what we find, and we tell you what we find. Some problems can be corrected with a repair. Severely damaged or badly configured venting may need to be replaced. We don't believe in recommending work your system doesn't need. If a repair will do it, see Dryer Vent Repair.

What does the inspection cost?

Nothing. The inspection to determine the issue and measure the project is free.

What will the replacement cost?

It is priced on the length of the duct and the materials required, so we need to see it and measure it first. You get the price before any work begins.

Why not just clean it again?

Cleaning takes lint out of a duct. It does not uncrush a pipe, close a hole, or reconnect a joint. If the duct is the problem, another cleaning leaves you where you started.

What pipe do you use?

Rigid 28 gauge galvanized duct pipe, on every replacement, taped per code. Rigid metal holds its shape, so it does not sag or crush the way flex duct can. The inside is smooth, so lint has less to catch on.

Is this the hose behind my dryer?

No. That short hose is the transition duct, and it has its own service: Dryer Transition Duct Replacement. This page covers the duct that runs from there to the outside of your house.

The work is inside my wall. How do I know it was done right?

You get photo documentation of the project. It is included with every duct replacement, so you see the new pipe before it goes back behind the wall.

How long does it take?

It depends on the length of the run and where it goes. We tell you how long to expect at the inspection, before any work starts.

Will a new duct make my dryer faster?

Usually loads dry in less time once the air can get out. We won't promise it for every home. A slow dryer can have other causes, and if we see one we will say so.

If it is not the long duct

Dryer Transition Duct Replacement

The short hose behind the dryer. Crushed, too short, or full of holes? That one gets swapped on its own.

Dryer Vent Re-Routing

The run itself is the problem: longer than it needs to be, or pieced together with flex duct. We repair or replace the duct and bring it up to current code.

Dryer Vent Repair

One part of the vent is damaged and the rest is sound. We fix that part.

Don't know which one you have? Start with the free inspection. Or see every service on Services.

See the new pipe before the wall hides it.

Right now it is a duct you have never seen and a dryer that takes too long. If the duct is the problem, another cleaning leaves you where you started.

One call starts a free inspection. We find the issue, measure the project, and tell you the price before any work begins.

If it needs replacing, you get rigid metal pipe, taped per code, and the photos to prove it.

You go from being told the duct is shot, with no way to check, to holding photos of the new one.

The Lint Guy. Monday to Saturday, 7am to 6pm. Serving Chattanooga and nearby North Georgia. Fully insured.