Skip to main content

Dryer Vent Rerouting in Chattanooga

You Didn't Pick the Route Your Dryer Vent Takes. Someone Did, in a Hurry, Years Ago. It Can Be Fixed Once.

Some dryer vents take the long way out of the house, or were pieced together with flex duct. A cleaning takes the lint out and leaves that path where it was. We repair or replace the duct and bring it up to current code.

For the vent that gets cleaned, works for a while, and goes right back to slow. The estimate is free, and you hear the price before any work starts.

50+ five-star reviews

Long, sagging flex duct with several bends in a crawl space, a run that calls for dryer vent rerouting in Chattanooga.

Your vent is clean and still wrong.

Dryer vent rerouting in Chattanooga is for one kind of house: the one where the vent was never built right in the first place.

The owner of The Lint Guy puts it this way: "Sometimes dryer vents are longer than they need to be, and sometimes the ducting is just some flex duct that was installed last minute."

The pipe wanders. Or it is a length of flexible hose strung through the crawl space or the attic, where the plan was to come back and do it properly, and no one did.

Lint loves a vent like that. Every extra foot is one more place for it to settle.

So you have it cleaned.

The dryer perks up. A few months later the towels need a second cycle again, and you start to wonder what you are missing.

You are not missing anything.

You did not pick this route. Someone picked it for you, in a hurry, years ago, and you have been doing the right thing by keeping it clean. But a cleaning takes the lint out and leaves the path exactly where it was.

You should not have to keep paying for a shortcut somebody else took.

Re-routing deals with the path.

We repair or replace your dryer duct and bring it up to current code.

Signs the route is the problem

You had the vent cleaned and the dryer was slow again soon after.

The dryer gets hot and runs fine, and a normal load still takes two cycles. Maytag says a dryer that heats but dries slowly likely has a vent issue.

You have seen flexible duct in the crawl space or the attic. Foil or plastic hose, where there should be metal pipe.

The dryer sits a long way from the spot where the vent comes out of the house, or the duct makes a lot of turns to get there.

The laundry room was moved or added on, and the old vent was stretched to reach.

Someone who looked at the vent told you it was put in wrong.

What happens if it stays the way it is

Nothing dramatic happens.

It just keeps costing you.

Maytag says a restricted vent means longer drying times and more energy used.

So the loads stay slow and the dryer runs longer than it should, every week, for as long as you own the house.

The owner says it plainly on his own site:

"Long runs can put unwanted strain on your dryer and flex duct in the crawlspace or attic is just asking for trouble."

And you keep paying to clean a vent that goes back to slow, with the towels back to two cycles each time.

Slow drying can come from the dryer itself. That is why we look before we recommend anything.

The plan: three steps, and you only do the first one

  1. We find it, fix it, and show it.

  2. Dry a load in one cycle and stop thinking about the vent.

The Safe & Dry Process on a re-routing job

  1. FIND IT.

    We follow the vent from the dryer to the outside. The lint trap. The hose behind the dryer. The duct, wherever it goes: wall, crawl space, attic. The cover outside. We see how far it runs and what it is made of. Then we tell you what we found and what it costs to deal with it, before we touch a thing.

    Sometimes what we find is a good route that needs a cleaning. Then that is what we tell you.

  2. FIX IT.

    We repair or replace the duct and bring it up to current code. When we replace duct, we use rigid 28 gauge galvanized pipe, taped per code. Where flex duct comes out, metal pipe goes in its place. Your house gets what it needs. We don't sell you the rest.

  3. SHOW IT.

    Before we pack up, we show you the work. We test the airflow while you watch and show you photos of the new duct, since most of it is somewhere you will never crawl.

See every step in full: The Safe & Dry Process

The call is the one step that is yours. The estimate is free.

What you get

  • A free estimate.
  • A look at the whole vent: lint trap, hose behind the dryer, duct, and the cover outside.
  • A plain explanation of what we found.
  • The price, explained before any work starts.
  • Your dryer duct repaired or replaced.
  • New duct in rigid 28 gauge galvanized pipe, taped per code, wherever we replace it.
  • A vent brought up to current code.
  • An airflow test at the end, with you watching.
  • Before and after photos of the parts you cannot see, shown to you before we leave.
New rigid galvanized pipe with foil-taped joints under floor joists after dryer vent rerouting in a crawl space.

Who is doing the work

The Lint Guy works on dryer vents with long runs, multiple bends and hard-to-reach spots all over Chattanooga and nearby North Georgia. Crawl spaces are a normal day for us.

Fully insured.

50+ five-star reviews.

Five stars

Matt is excellent at what he does! He re-routed my dryer vent to make the system work more efficiently and safely. Highly recommend him for any of your washer/dryer needs.

Danielle Newton, Google review

Dryer vent re-routing questions

I just had the vent cleaned and the dryer is slow again. Is it the route?

It might be. A restricted dryer vent cuts airflow and makes a dryer take longer. A long or pieced-together duct is one way a vent ends up restricted. Slow drying can also come from the dryer itself, so we look at the vent first and tell you what we see.

Can't you just clean a long vent more often?

Sometimes that is the right answer. We clean long runs with a lot of bends all the time, and a long vent is one that most needs a professional cleaning. If your route is sound, we will say so and clean it. We don't believe in recommending work that your system doesn't need.

Do you replace the whole duct?

Only if it needs it. Some vents need a section repaired and some need the duct replaced. We explain which, and why, before we start.

What does it cost?

It depends on what we find, so there is no number on this page. Estimates are free, and you hear the price before any work begins. If what we find is a good route that needs a cleaning, that is what we tell you.

What does "up to current code" mean for my house?

Building code has rules for what a dryer duct is made of and how it is run. When we look at your vent, we tell you in plain words where it falls short and what it takes to put it right. Any new duct we put in is rigid 28 gauge galvanized pipe, with the joints taped per code.

My duct runs through the crawl space. Can you get to it?

Yes. Crawl spaces are a normal day for us.

How long does a re-routing job take?

It depends on the length of the run, where it goes and what we find when we look. We tell you how long to expect before we start.

I'm remodeling and moving the laundry room. Is that this service?

That is a new vent, and we do those too. See Dryer Vent Installation.

Not sure this is the one? You don't have to be.

Call, and we look at the vent and tell you which of these your house needs.

Dryer Vent Repair

The run is fine and one part of it is damaged, crushed or has come apart. We fix that part of the vent you already have.

Dryer Duct Replacement

The duct is too far gone to repair. The old duct comes out and rigid metal pipe goes in.

Dryer Vent Installation

There is no vent yet, or the dryer is moving: new construction, a remodel, a changed route.

Dryer Vent Re-Routing, this page, is for a run that is itself the problem: longer than it needs to be, or pieced together with flex duct.

Fix the path once. Then go back to ignoring your dryer.

You have been cleaning a vent that never works right. Have it built right and be done with it.

Leave it, and you keep paying to clean a vent that goes back to slow. One call gets you a free estimate, and you hear the price before any work starts.

Then the air has a proper way out of the house.

The duct is metal, taped and up to current code. For most homes, loads dry faster. We can't promise that for every dryer, and we will tell you if yours has another problem.

And you know exactly how your vent runs, because we showed you.

In the owner's words, it is fixed "so you can rest easy at night."

Monday to Saturday, 7am to 6pm. Serving Chattanooga and nearby North Georgia.