Skip to main content

Dryer Transition Duct Replacement in Chattanooga

Push the Dryer Back Against the Wall and the Hose Can Fold Flat Behind It. Nobody Looks Back There.

Loads got slower after the dryer was moved? The hose behind it may be crushed, too short, or full of holes. We replace it.

You want the dryer back in its spot and the air going outside. The Lint Guy handles dryer transition duct replacement for homes in Chattanooga and nearby North Georgia. You hear the options and the price before any work starts, and you pick. The estimate is free.

50+ five-star reviews

Fully insured. Monday to Saturday, 7am to 6pm.

Crushed foil dryer transition duct behind a dryer pulled out from the wall in a Chattanooga laundry room.

Meet the least-visited spot in your house

Behind your dryer there is a short hose. It runs from the back of the dryer to the pipe in the wall. The trade name for it is the transition duct.

Every bit of hot, damp air your dryer makes goes through that hose first. So does the lint that got past the screen. A clean lint screen does nothing for a hose that is folded flat.

It is also the easiest part of the whole vent to wreck.

Push the dryer back against the wall and the hose can fold flat behind it. You would not see it happen, because the dryer is in the way.

Nobody looks behind the dryer. We look there on every job.

When the hose is too short, crushed, or has too many holes in it, we take it out and put in a new one.

Short dryer transition duct folded flat between the back of a dryer and the vent pipe in the wall.

Signs the hose behind your dryer needs replacing

Pull the dryer out and a bad hose looks like one of these. The last sign you can spot without moving a thing.

  • It is too short. The hose is stretched tight, or it pops off when the dryer moves.
  • It is crushed. The dryer got pushed back and the hose is flattened or kinked behind it.
  • It has holes. Tears or gaps in the flex duct, with lint on the floor and the wall behind the dryer. Air that escapes through a hole takes lint with it.
  • Your loads take longer than they used to, and the dryer got moved not long before that started.

You may be thinking: I pushed that dryer back myself. How long has it been like that?

It is a fair question, and it is not your fault.

Sliding a dryer back into place should not be able to choke it.

What a bad hose costs you if it stays

A crushed hose is a blocked vent, right at the start of the line.

  • Longer drying times and more energy used. That is what Maytag says a restricted vent does.
  • A hotter dryer. In tests by the U.S. Consumer Product Safety Commission, dryers ran hotter when the vent was blocked.
  • On a gas dryer, a restricted vent may leak exhaust that could contain carbon monoxide, according to Technical Safety BC.

And the lint keeps coming with every load, through the same bad hose.

The Safe & Dry Process, for one short hose

Find it. Fix it. Show it.

  1. FIND IT.

    We pull the dryer out and look at the hose, both connections, and the rest of the vent it feeds. Then we tell you what we found, which replacement options fit your setup, and what each one costs. All of that happens before we touch a thing.

  2. FIX IT.

    The old hose comes out. The new one goes in, the right length for where your dryer sits, so it is not stretched tight when the dryer goes back. You pick the option. We don't recommend work your system doesn't need.

  3. SHOW IT.

    Before the dryer goes back, you see the new hose connected at both ends. You are not taking our word for what is behind there. Then we test the airflow, and you watch that too.

See every step on The Safe & Dry Process.

A crushed hose stays crushed until someone pulls the dryer out. One call gets that started, and the estimate is free.

What the job includes

  • A look at your transition duct, the hose behind the dryer, and how it connects.
  • Your options and the price, explained before any work starts. Estimates are free.
  • Removal of the short, crushed or holed hose.
  • A new transition duct. We offer a variety of options for every need and budget. Whichever you pick, it is fitted to the right length for where your dryer sits.
Matt Semerano, owner of The Lint Guy

Matt Semerano, owner of The Lint Guy.

Optional upgrade: the magnetic dryer connection

We also offer a magnetic dryer connection upgrade: a self-aligning magnetic dryer vent coupling that connects your dryer to the vent. Ask about it when you call, and we will tell you if it suits your setup.

The magnets pull the two halves together and line them up, so the connection is made as the dryer goes back into place.

It is offered with a dryer vent cleaning. If you would like it with a new hose, say so when you call, and you will hear the price before any work starts.

Who replaces it

The Lint Guy is fully insured, with 50+ five-star reviews.

Five stars

Very professional and personable! Did a fantastic job on my challenging duct. Will call him again for sure!

Jodie Mize, Google review

Questions about replacing a dryer transition duct

What is a transition duct?

The hose behind your dryer. It joins the back of the dryer to the pipe in the wall.

How is this different from dryer duct replacement?

Different part. The transition duct is the hose you can see when you pull the dryer out. The dryer duct is the pipe inside the wall, floor or ceiling that carries the air outside. If that pipe is the problem, see Dryer Duct Replacement.

What does it cost?

It depends on the option you choose. You hear the price before any work starts. Estimates are free.

Can you clean my hose and leave it in?

If the hose is sound, yes. Cleaning the flexible dryer hose is part of Dryer Vent Cleaning. A hose that is crushed, too short or full of holes needs replacing. We don't recommend work your system doesn't need.

Will a new hose make my dryer dry faster?

Often, if the old hose was the thing holding the air back. It is not a promise for every home. Drying problems can also be caused by the dryer itself.

What if you find damage past the hose?

We explain what we found. Some problems can be corrected with a repair. Severely damaged or badly configured venting may need replacement. You get the options before we do any additional work.

Next to this job

Dryer Duct Replacement

The hose is fine and the pipe in the wall is too far gone to repair. The old duct comes out and rigid metal pipe goes in.

Dryer Vent Cleaning

The hose is sound and the pipe past it is packed with lint. That is a cleaning, with a flow test at the end.

Dryer Vent Repair

One part of the vent past the hose is damaged and the rest is sound. We explain it first, then fix that part.

Can't tell the hose from the pipe? Call. We look at both. See all Services.

Push the dryer back. This time the air gets out.

The new hose is sound, the right length, and connected at both ends. The air goes into the pipe in the wall and out of your house, and the dryer sits back in its spot.

The person who shoved the dryer back and hoped is now the homeowner who has seen behind it and knows what is there.

Until someone pulls the dryer out, the hose stays the way it is, and every load goes through it. One call starts it. You hear the options and the price before any work starts.

The Lint Guy. Chattanooga and nearby North Georgia. Monday to Saturday, 7am to 6pm.

New dryer transition duct clamped at both ends behind a dryer in a Chattanooga home before it slides back.